Cornhole is a fun outdoor game that is perfect for backyard barbecues, picnics, and parties. Building your own cornhole boards can be a rewarding DIY project that will provide hours of entertainment for you and your friends. In this guide, we will walk you through the steps to build your own cornhole boards.
Materials Needed:
- 2 pieces of 2×4 plywood
- 4 pieces of 2×4 lumber
- Screws
- Saw
- Measuring tape
- Drill
- Sandpaper
- Cornhole bags
- Pencil
- Paint or stain (optional)
Step 1: Cutting the Plywood
Begin by cutting the 2×4 plywood into two 2×4 feet sections. These will be the playing surfaces of your cornhole boards.
Step 2: Building the Frame
- Measure and cut the 2×4 lumber into four pieces, each 2 feet long.
- Assemble the frame by attaching the 2×4 lumber pieces to the edges of the plywood sections using screws.
- Use a drill to secure the frame in place.
Step 3: Cutting the Hole
Measure 9 inches down from the top of the frame and 12 inches in from the sides. This is where you will cut the hole for the cornhole board.
Step 4: Finishing Touches
- Use a saw to cut out the hole.
- Sand down any rough edges to smooth out the surface.
- Paint or stain the boards in your desired color or design.
Step 5: Adding Legs
- Cut four pieces of 2×4 lumber to your desired length for the legs.
- Attach the legs to the back of the cornhole boards using screws.
- Make sure the legs are at the proper angle for stability.
Step 6: Playing Cornhole
Once your cornhole boards are built, you can start playing the game. Place the boards 27 feet apart from each other, and take turns tossing the cornhole bags into the hole. The first player or team to reach 21 points wins!
Building your own cornhole boards is a fun and rewarding project that will provide hours of entertainment for you and your friends. Follow these steps to create your own custom cornhole set and start enjoying this classic outdoor game today!
