![](https://android62.com/en/wp-content/uploads/2024/02/how-to-07-android62.jpg)
Macrame plant hangers are a beautiful and trendy way to display your favorite plants in your home. Not only do they add a touch of bohemian style to any space, but they also allow you to make the most of vertical space. Making your own macrame plant hanger is a fun and rewarding DIY project that anyone can do with a bit of practice. Follow this step-by-step guide to create your very own macrame plant hanger.
Contents
Materials Needed:
- 3mm cotton macrame cord
- Scissors
- Wooden ring or metal ring
- Measuring tape or ruler
- Pot or plant holder
Step 1: Cut Your Cord
Start by cutting six pieces of cord, each measuring approximately 3.5 times the length you want your plant hanger to be. For example, if you want a plant hanger that is 40 inches long, cut each piece of cord to about 140 inches.
Step 2: Attach Your Ring
Take all six pieces of cord and fold them in half. Pass the folded end through the ring, creating a loop. Pull the loose ends of the cord through the loop and tighten to secure the ring in place.
Step 3: Create Your Knots
Divide the cords into three groups of four cords each. Starting about 6 inches below the ring, tie a square knot with the cords in each group. To tie a square knot, follow these steps:
- Take the cords on the left side and cross them over the middle cords.
- Bring the cords on the right side over the left cords, then tuck them under the middle cords and through the loop on the left side.
- Pull the cords tight to create a square knot.
Step 4: Create Your Pattern
Continue tying square knots with each group of cords, leaving about 1 inch of space between each knot. You can create a variety of patterns by alternating the direction of your knots or combining different types of knots, such as the spiral knot or the half-hitch knot.
Step 5: Create Your Plant Holder
Once you have reached your desired length for the plant hanger, gather all the cords and tie them together at the bottom, leaving a few inches of loose cord. Insert your pot or plant holder into the loops created by the loose cords and adjust the length as needed.
Step 6: Trim and Hang Your Plant Hanger
Finally, trim the ends of the cords to your desired length and style. You can leave them long for a tassel effect or trim them short for a clean look. Hang your macrame plant hanger from a hook or ceiling mount and place your favorite plant inside.
Additional Tips:
- Practice makes perfect: Macrame can be a bit tricky at first, so don’t be afraid to practice your knots on a small piece of cord before starting your plant hanger.
- Get creative: Experiment with different types of cord, beads, or plant holders to create a unique and personalized look for your macrame plant hanger.
- Personalize it: Consider adding embellishments like feathers, shells, or crystals to add a bohemian touch to your plant hanger.
Now that you have learned how to make a macrame plant hanger, you can create beautiful and custom pieces to display your plants in style. Whether you are a beginner or an experienced crafter, making your own macrame plant hanger is a fun and fulfilling project that will add a touch of handmade charm to your home decor.