If you are a fan of outdoor games, then you must have come across cornhole. It is a popular lawn game that is enjoyed by people of all ages at tailgates, picnics, and backyard barbecues. Cornhole involves tossing bean bags onto a slanted board with a hole at the end. If you want to take your cornhole game to the next level, consider making your own cornhole boards. Here’s a comprehensive guide on how to make cornhole boards.
Materials Needed
Before you start building your cornhole boards, gather all the necessary materials. Here’s what you will need:
– Two 2’x 4’ plywood sheets
– Four 2’x 4’ wooden boards
– Wood glue
– Wood screws
– Sandpaper
– Tape measure
– Pencil
– Saw
– Drill
– Hole saw
– Paint or wood stain
Step 1: Cutting the Wood
Measure and cut the plywood sheets to make a perfect square with dimensions of 24”x 24”. Then, cut the wooden boards to create a frame for the plywood. Once cut, lay out the wooden boards around the edges of the plywood to form a frame.
Step 2: Assembling the Frame
Apply wood glue to the edges of the plywood and secure the wooden boards in place. Use wood screws to attach the wooden boards securely to the plywood.
Step 3: Cutting the Hole
Measure 12 inches from the top and 9 inches from the side of the board to mark the center of the hole. Use a hole saw to cut a 6-inch diameter hole at the marked center.
Step 4: Sanding
Use sandpaper to smooth out any rough edges or surfaces on the cornhole board. Make sure the surface is smooth to ensure the bean bags slide easily during play.
Step 5: Painting or Staining
Once the board is sanded, you can customize it by painting it with your favorite colors or staining it to give it a rustic look. Let the paint or stain dry completely before using the boards.
Step 6: Adding Legs (Optional)
If you want to add legs to your cornhole boards for elevation during play, cut four pieces of wood about 12 inches long each. Attach them at the back of the boards to create a stand that allows the board to slant at the appropriate angle.
Tips and Tricks
Making cornhole boards is a fun DIY project, but here are some tips to ensure you get the best results:
– Take your time with measurements to ensure accuracy.
– Use a high-quality hole saw to cut the hole in the board.
– Apply wood glue generously to ensure a strong bond between the plywood and wooden frame.
– Sand the board thoroughly for a smooth playing surface.
– Seal the boards with a clear coat after painting or staining to protect them from the elements.
Conclusion
Making cornhole boards is a rewarding and enjoyable project that can bring hours of fun to your outdoor gatherings. By following the steps outlined in this guide and incorporating the tips and tricks provided, you can create your own custom cornhole boards that are sure to impress your friends and family. So, roll up your sleeves, gather your materials, and get ready to enjoy a game of cornhole on boards made by your own hands.
