Window wipers, also known as windshield wipers, are an essential component of any vehicle as they help to clear rain, snow, sleet, or any other debris obstructing the driver’s view. However, there may come a time when you need to remove and replace your window wipers due to wear and tear or damage. In this guide, we will provide you with step-by-step instructions on how to properly remove window wipers from your vehicle.
Tools Needed:
- Flathead screwdriver
- Needle-nose pliers
- Adjustable wrench
- New window wipers (optional)
Steps To Remove Window Wiper:
Step 1: Lift the Wiper Arm
Before you begin, make sure the wiper arm is in the raised position by lifting it away from the windshield. This will give you better access to the wiper blade and make it easier to remove.
Step 2: Locate the Release Tab
On most vehicles, the wiper blade is attached to the wiper arm by a small release tab or locking mechanism. Look for this tab near where the wiper blade meets the wiper arm.
Step 3: Press the Release Tab
Using a flathead screwdriver or your fingers, press down on the release tab to unlock the wiper blade from the wiper arm. You may need to apply some pressure, so be careful not to damage the wiper arm in the process.
Step 4: Remove the Wiper Blade
Once the release tab is pressed, gently pull the wiper blade away from the wiper arm. It should slide off easily, but if it’s stuck, you can try wiggling it back and forth to loosen it.
Step 5: Remove the Wiper Arm
If you need to replace the entire wiper assembly, including the wiper arm, you will need to remove it from the vehicle. Use an adjustable wrench to loosen the nut that secures the wiper arm to the wiper spindle.
Step 6: Disconnect the Washer Fluid Hose (if necessary)
Some vehicles have a washer fluid hose that runs through the wiper arm. If your vehicle is equipped with this feature, use needle-nose pliers to carefully disconnect the hose from the wiper arm before removing it.
Step 7: Remove the Wiper Arm
After disconnecting the washer fluid hose, use the adjustable wrench to remove the nut completely and then lift the wiper arm off the spindle. Be sure to keep track of any washers or spacers that may be attached to the wiper arm.
Additional Tips:
- Wipe down the wiper arm and spindle with a clean cloth to remove any dirt or debris before installing the new wiper assembly.
- Inspect the wiper arm for any signs of wear or damage and replace it if necessary.
- When installing new wiper blades, make sure they are the correct size for your vehicle to ensure proper fit and function.
- Consider replacing both wiper blades at the same time to maintain even wear and provide consistent visibility.
By following these step-by-step instructions, you can easily remove the window wipers from your vehicle and replace them with new ones if needed. Remember to take your time and be careful to avoid damaging any components during the removal process. If you’re unsure about how to remove window wipers from your specific vehicle, consult your owner’s manual or seek assistance from a professional mechanic.
